Created as a showcase project, AMAZE-28, the single-room summer house, was successfully constructed within 28 days on the grounds of the Kerala State Nirmithi Kendra. The 3D-printed building at the Kerala State Nirmithi Kendra in Thiruvananthapuram. (Photo: Shekunj) The inauguration of Kerala's inaugural 3D-printed structure, a 380-square-foot single-room summer house, is scheduled to take place on October 10 at the Kerala State Nirmithi Kendra (Kesnik) campus located in PTP Nagar, Thiruvananthapuram. Conceived as a showcase initiative, the summer house named AMAZE-28 was successfully finished within a mere 28 days. This impressive project was executed by Tvasta, a construction technology startup based in Chennai, founded by alumni of IIT-Madras, who have entered into a memorandum of understanding (MoU) with Kesnik. AMAZE-28 is perched upon a concrete foundation atop a gentle elevation within the Kesnik campus. Febi Varghese, the Director and Chief Executive Officer of...
How to 3D sketch and use Swept Base/Boss Command in SolidWorks | 3D Sketch | Sweep Command | Penrose Cube In this Tutorial, an amazing 3D solid model of cube will be generated using SolidWorks. This cube is made up of single continuous extruded material in the form of a loop. This tutorial will demonstrate you some basic tools and operations of SolidWorks. Tools/Commands used: 3D Sketch Fillet (Sketch) Sweep Boss Command Cube: using 3D sketch and Sweep Boss Download 3D Solid Model File of Penrose Cube: Download Download STL file of Penrose Cube: Download